How do I mount the convection heater to a wall?

It can be either used free-standing or mounted to a wall using the set of plastic legs and wall mounts included in the package.

1. Open the packing box and take out the convector with its protective nylon cover. Tear the protective nylon cover outside the box without giving any harm to the appliance and take out the hangers attached on the unit by pulling the springs thereon.

2. Correct space has to be measured in order that the connection cord can easily beconnected to the electric socket. After determining the place the holes for montage must be drilled. To fix this appliance you can use the wall mounting bracket. Mounting bracket can be used as a template for positioning and drilling points. You can place the bracket on the wall and measure the space between the floor and the lower part of the bracket as min 100 mm or max. 200 mm. Mark the screw-holes through the holes with an appropriate pen. You have to be careful to ensure the safety zones are kept free in order that the appliance can work efficiently. 

3. After marking the points, the holes will be drilled by a Ø9 mm drill and the plastic dowels that are in the montage items are driven to these holes.

4. Wall mounting brackets supplied with the unit has to be fixed securely to the wall.

Note: By adding the requested height difference to these measures the height can be arranged as demanded.

5. Back side of the Electric Panel Convector Heater with arrow sign will be placed to the plastic part of the wall mounting brackets.
6. The spring section on the wall mounting brackets will be pulled and put through the holes on the upper part of the convector in order to fix the unit.
Note: For any reason if you want to uninstall your panel convector, you should pull the upper hooks and bend to front.